Screenpritning - health and safety - Surrealism

Screen Printing

equipment needed; spoon, acrylic paint, acrylic medium, squeegee, packaging tape.

The screen is made from a fine mesh material which is fixed to a metal frame. A stencil is placed under the screen and ink is forced through the stencil on to the material below. Screen printing with stencils is best for blocks of colour.

Firstly your positive film positive used will be exposed and will harden the light sensitive emulsion on to the tight fabric which is already on the metal frame, then you have to tape up all the yellow areas and the sides of the metal frame. Once you have done this you can then put your mix of acrylic ink with acrylic medium on to the top of the frame and then squeegee the ink across the screen stencil forcing the ink through the open areas, then lift your frame back up and squeegee ink back across to keep the screen wet otherwise it will dry up.